How to Install Kitchen Cabinets

You are likely to save thousands of dollars by installing the kitchen cabinets yourself. If you are looking to remodel the kitchen yourself, then you have come to the right place. We will show you how to assemble these kitchen cabinets yourself.

To begin with, you will need some basic hand and power tools to complete the project. This includes a cordless drill, circular or table saw, hand held planer or belt sander, clamps, a countersink bit, hand plane, jigsaw, four foot level, stud finder, hammer and different sized drill bits. As soon as you determine the layout for your new kitchen, you must find the high point for the floor. While installing kitchen cabinets, you must always begin with the corner wall cabinet.


Behind the cabinet location, you will have to locate the framing with the help of the stud finder. Mark down the stud location on the wall. After that, you will have to transfer these measurements at the back of your cabinet. For best results, it would be suggestive to transfer these stud locations inside the cabinet and drill every location from the corner of the wall cabinet. You can use an 11/64″ drill bit for this purpose. You will see a hanging strip on the top as well as the bottom of the cabinet. Ensure that the holes are drilled from this strip.

The level is extremely important while installing kitchen cabinets. Once you get the first cabinet perfectly, the others will just follow. Another important thing to keep in mind is that you must remove the interiors and the doors while installing the cabinets on the wall. There are different ways to remodel your kitchen, however installing the kitchen cabinets is one of the simplest jobs out there.